▌ Executive Summary
Landiview Stone completed the inspection and packing of seven custom Taj Mahal Quartzite countertops with integrated sinks for a private high-end residence in China. Each unit combines the countertop and sink in a coordinated natural-stone assembly, creating a consistent material appearance across the vanity surface, basin walls and exposed edges.
The completed scope includes seven different sizes, from a compact 765 × 505 × 200 mm unit to a 2450 × 605 × 200 mm double-sink countertop. Selected pieces also feature rounded left or right ends to match the project-specific bathroom layouts.
▌ Product Specifications
The recorded overall dimensions for the seven finished countertop assemblies are listed below. Dimensions are shown as length × width × overall height in millimetres.
| Unit | Overall Dimensions | Quantity |
|---|---|---|
| 01 | 855 × 505 × 200 mm | 1 |
| 02 | 1205 × 505 × 200 mm | 1 |
| 03 | 1015 × 505 × 200 mm | 1 |
| 04 | 2450 × 605 × 200 mm | 1 |
| 05 | 765 × 505 × 200 mm | 1 |
| 06 | 940 × 505 × 200 mm | 1 |
| 07 | 1325 × 505 × 200 mm | 1 |
▌ Integrated Sink Design and Fabrication
Fabricating an integrated natural-stone sink requires coordinated cutting, edge finishing and assembly so that the countertop, basin floor and basin walls read as one architectural element. For this project, the finished pieces include single-sink units, a long double-sink unit and countertops with rounded end profiles.
- • Taj Mahal Quartzite used across the visible countertop and integrated basin surfaces
- • Rectangular sink geometry with sloped basin surfaces directing water toward the outlet area
- • Project-specific lengths and widths for different bathroom vanity locations
- • Rounded left-end and right-end configurations for selected units
- • Consistent edge and surface treatment across the assembled stone components
▌ Final Quality Inspection
Before packing, the seven countertop assemblies were reviewed as finished products rather than as separate stone pieces. This allows the inspection team to check the visible stone character, assembled geometry and vulnerable fabricated areas before the units leave the workshop.
- 1. Confirm the finished unit against the approved project dimensions and configuration.
- 2. Review the countertop surface, integrated basin and exposed edges for visible workmanship issues.
- 3. Check the relationship between adjoining stone components and the continuity of the overall appearance.
- 4. Inspect rounded ends, corners and sink openings, which require additional protection during handling.
- 5. Conduct a water-retention test on each integrated sink and inspect the basin, stone joints and drain area for visible leakage.
- 6. Approve each unit for packing only after the final review is complete.
▌ Protective Packing
Integrated stone sinks contain projecting edges, internal corners and assembled joints that require controlled support during transportation. Each countertop was therefore placed in a custom wooden crate with cushioning materials positioned around the product and between the stone and crate structure.
The packing shown for this batch includes foam-lined contact areas, a rigid timber enclosure and clear outer wrapping for additional moisture and dust resistance. The purpose is to limit movement inside the crate and reduce direct impact on the countertop edges, rounded ends and sink structure during handling.
▌ Project Significance
This batch demonstrates how Taj Mahal Quartzite can be developed beyond standard vanity tops into fully coordinated bathroom features. The integrated-sink approach gives a private luxury residence a more continuous stone expression while allowing each countertop to be fabricated for its specific room dimensions and end conditions.
For architects, interior designers and contractors, early coordination of shop drawings, sink geometry, slab selection, edge profiles and packing requirements is essential because these assemblies are more complex and less tolerant of site modification than conventional countertops fitted with separate sinks.
▌ Frequently Asked Questions
Q: How many Taj Mahal Quartzite countertop units were completed?
A: Seven custom countertop assemblies with integrated sinks were inspected and packed on November 7 for bathrooms in a private luxury residence in China.
Q: What was the size range of the countertops?
A: The smallest listed unit measures 765 × 505 × 200 mm, while the largest measures 2450 × 605 × 200 mm. All seven units have project-specific dimensions.
Q: What configurations were included in the batch?
A: The batch includes single-sink countertops, a long double-sink countertop and selected units with rounded left or right ends.
Q: How were the integrated stone countertops protected for transportation?
A: The units were secured in custom wooden crates with cushioning around contact areas. The crates used rigid timber covers and clear outer wrapping to improve protection against movement, impact, dust and incidental moisture during handling.
