High-End Custom Home In CA, USA
Executive Summary
The key project value was coordination: Landiview Stone converted multiple residential stone scopes into approved component drawings, mapped critical pieces onto scanned slabs, verified complex assemblies before shipment, and packed long or vulnerable parts according to their geometry rather than treating the order as standard cut-to-size production.
This California custom-home package combined repeatable architectural components with one-off fabricated assemblies. All visible stone was specified as Dione Spider Marble with a honed finish and a nominal thickness of 18 mm. Dione Spider is recognized for a light field crossed by linear or web-like brown and gold veining, making actual slab selection and vein planning important whenever adjacent pieces must read as one composition.
The project scope included large kitchen surfaces, integrated stone sink assemblies, bathroom vanity tops, shower trims and four long-fluted tile profiles. The fluted program alone comprised 800 pieces: two convex profiles and two concave profiles in 72 x 1 inch and 96 x 2 inch formats. Project execution followed a controlled sequence:
- 1. Review architectural and cabinetry information and divide the stone package into fabrication-ready components.
- 2. Prepare shop drawings for islands, countertops, integrated sinks, vanity tops, shower trim and long fluted tiles.
- 3. Define visible faces, honed finish, nominal 18 mm stone thickness, edge profiles, curved corners and concealed reinforcement.
- 4. Place approved parts onto scanned slab images in AutoCAD to coordinate cutting positions, usable yield and vein relationships.
- 5. Fabricate straight, curved, convex and concave components, including reinforced long strips and assembled sink structures.
- 6. Dry lay, inspect and number finished pieces; water-test integrated sink assemblies where applicable.
- 7. Protect finished surfaces with foam and film, isolate vulnerable edges, and load the products into plywood-lined solid-wood export crates.
Key Facts
| Project Field | Confirmed Project Information |
| Project type | High-end custom home |
| Destination | California, USA |
| Supplier | Landiview Stone |
| Stone | Dione Spider Marble |
| Visible finish | Honed |
| Nominal stone thickness | 18 mm |
| Kitchen scope | 13 sets of kitchen islands and kitchen countertops in different dimensions, including detailed sink, edge and reinforcement conditions where required |
| Bathroom scope | 11 vanity-top sets in different dimensions |
| Shower trim | 100 pieces, each 60 x 5 inches |
| Fluted tile type 1 | 200 pieces, 72 x 1 inches, convex profile |
| Fluted tile type 2 | 200 pieces, 96 x 2 inches, convex profile |
| Fluted tile type 3 | 200 pieces, 72 x 1 inches, concave profile |
| Fluted tile type 4 | 200 pieces, 96 x 2 inches, concave profile |
| Total long fluted tiles | 800 pieces across four sizes and profiles |
| Digital coordination | Stone shop drawings plus AutoCAD virtual assembly, scanned-slab cutting simulation and vein-layout planning |
| Factory quality controls | Dimensional and profile inspection, dry layout, vein review, piece numbering, finished-product photography and water testing for integrated sink assemblies |
| Reinforcement shown in drawings | Project-specific engineered-stone backing and local 304 stainless-steel reinforcement for selected long fluted components and assembled stone products |
| Export protection | Foam coverage, film wrapping, internal blocking and plywood-lined solid-wood crates selected for long, curved or assembled components |
Stone Products and Packaging
Project Stone Shop Drawings
Frequently Asked Questions
Q: What stone products did Landiview Stone supply for this California custom home?
A: The package included 13 sets of kitchen islands and countertops, 11 vanity-top sets, 100 pieces of 60 x 5 inch shower trim, and 800 long fluted tiles divided equally among four convex and concave formats.
Q: What material, finish and thickness were specified?
A: The visible material was Dione Spider Marble with a honed finish and a nominal stone thickness of 18 mm. Reinforcement thickness and material varied by component and were defined in the relevant shop drawings.
Q: What were the four long fluted tile formats?
A: The order used 200 pieces of 72 x 1 inch convex tiles, 200 pieces of 96 x 2 inch convex tiles, 200 pieces of 72 x 1 inch concave tiles, and 200 pieces of 96 x 2 inch concave tiles.
Q: Why were stone shop drawings and AutoCAD slab layouts important?
A: Shop drawings translated the architectural intent into dimensions, profiles, visible-face rules, joints, sink construction and reinforcement details. AutoCAD layouts then placed numbered parts on scanned slab images so the fabrication team could review cutting positions, vein relationships and usable yield before production.
Q: How were integrated stone sinks checked before shipment?
A: The assemblies were inspected after fabrication and dry assembly. Where applicable, water was introduced into the sink to review drainage, visible joint conditions and leakage risk before protective packing.
Q: How were long fluted tiles and assembled countertops packed for export?
A: Long strips were grouped and restrained inside plywood-lined solid-wood crates. Large or assembled countertops received broad foam coverage, film wrapping, edge isolation and internal timber blocking so movement and direct contact were reduced during handling and ocean transport.
Q: What care considerations apply to honed Dione Spider Marble?
A: Dione Spider Marble should be treated as a natural calcareous stone. Use a neutral cleaner or stone soap, blot spills promptly, avoid acidic products such as vinegar or citrus-based cleaners, and confirm any sealer and maintenance method on a representative sample. A honed finish reduces mirror-like reflection but does not eliminate acid-etching risk.
About Landiview Stone
For project inquiries, provide architectural drawings, cabinet drawings, sink and appliance specifications, required finish, visible-edge rules, destination and approval requirements. Landiview Stone can then define the drawing, slab-selection, fabrication, inspection and packing deliverables needed for a comparable quotation.
Landiview Stone supplies natural stone in two principal forms: slabs for importers, distributors and fabricators, and project-specific cut-to-size or finished stone products for contractors, developers, designers, builders and other project buyers.
For slab buyers, Landiview Stone supports current slab selection, slab-image review, color and vein-range confirmation, surface inspection, slab identification and export packing.
For cut-to-size and custom-fabrication projects, Landiview Stone can coordinate:
- • Shop drawing review and fabrication-detail development;
- • Slab scanning and AutoCAD cutting and vein-layout simulation;
- • Countertops, vanity tops, integrated stone sinks, curved parts, profiled trim and fluted stone components;
- • Dry layout inspection, piece numbering and finished-product documentation;
- • Temporary reinforcement for vulnerable geometry and project-specific export protection;
- • Three-dimensional modeling and virtual assembly review for complex fabricated or assembled stone products.
For complex assemblies, three-dimensional review can be used to examine component relationships, stone and backing thicknesses, visible finishes, concealed reinforcement and potential interference before fabrication details are released. This process does not replace installation engineering or site verification, but it gives project buyers a clearer approval record and gives production teams a more complete fabrication reference.