▌ Executive Summary
Landiview Stone is producing 20 Italian Cipollino Ondulato marble slabs in 20 mm thickness with a honed finish for an Australian client. The order, placed on Monday, August 31, 2026, comprises two export bundles. Because slabs within the same shipment may be used across connected interior surfaces, Landiview Stone began the production process by selecting one suitable block rather than assembling the order from unrelated slab lots.
The selected block displays the highly active movement associated with Cipollino Ondulato marble: broad cream and pale grey fields crossed by charcoal, muted green, white and subtle brown waves. After cutting, the slabs entered a controlled resin-treatment stage before honing. Production will continue with finish review, slab-by-slab inspection, bundle coordination and export packing.
▌ Why Was One Marble Block Selected for the Full Order?
Cipollino Ondulato is purchased for its dramatic natural movement, but that movement can vary considerably between blocks and even between adjacent areas of the same block. Selecting one block for the 20-slab order gives the project team a stronger basis for coordinating the shipment by geological character, overall colour family and vein direction.
Using one block does not make natural stone uniform, nor should it. Each slab remains unique. The practical advantage is continuity: the slabs originate from the same selected source and can be sequenced more logically for review, fabrication and installation planning.
▌ How Are the 20 Honed Marble Slabs Being Produced?
The order follows a defined production sequence designed to preserve the selected block's visual character while preparing the slabs for commercial review and export:
- 1. Confirm the order quantity, two-bundle arrangement, 20 mm slab thickness and requested honed finish.
- 2. Select a Cipollino Ondulato block with suitable dimensions and coordinated natural character.
- 3. Cut the selected block into slabs and place the slabs on stable processing tables.
- 4. Inspect the freshly cut surfaces and carry out the required resin treatment as part of slab stabilisation and surface preparation.
- 5. Hone the treated slabs to achieve a low-sheen surface appropriate to the approved order.
- 6. Inspect individual slabs for finish consistency, visible treatment quality, dimensions and overall presentation.
- 7. Coordinate the accepted slabs into two bundles and prepare them for protective export packing.
▌ Why Is Resin Treatment Used Before Honing?
Expressive metamorphic marbles can contain natural fissures, fine openings and mineral transitions created during geological formation. Resin treatment is used during slab processing to fill suitable surface openings and support a more stable, serviceable slab surface before the final finish is produced.
Resin treatment is not intended to erase the stone's geological character or make every slab identical. The treatment must be reviewed as part of quality control so that repaired areas, natural features and the honed surface remain commercially acceptable for the intended order.
▌ What Will Be Checked Before Export Packing?
Before the slabs are released for packing, Landiview Stone will review the order against the approved commercial requirements and the realities of the selected natural material. The inspection focus includes:
- • Correct total quantity of 20 slabs arranged in two bundles
- • Slab dimensions and the specified 20 mm thickness against the confirmed order requirements
- • Overall consistency of the specified honed finish
- • Resin-treatment quality and the presentation of natural fissures and mineral features
- • Slab faces, edges and corners for visible processing or handling damage
- • Colour range, vein movement and practical sequencing within the selected block
- • Clear slab identification and bundle records for shipment review
▌ Frequently Asked Questions
Q: What is included in this Australian Cipollino Ondulato order?
A: The order includes 20 Italian Cipollino Ondulato marble slabs in 20 mm thickness with a honed finish, organised into two bundles. The slabs are being produced from one carefully selected block to support a coordinated colour range and geological character across the shipment.
Q: Are all 20 slabs visually identical?
A: No. Cipollino Ondulato is a natural marble, so every slab has unique vein movement, colour transitions and mineral features. Producing the order from one selected block improves overall continuity, but natural variation remains an inherent and desirable characteristic.
Q: Why are the slabs resin-treated?
A: Resin treatment helps fill suitable surface openings and supports slab stability before the final honed finish is produced. The process is especially relevant to highly figured natural stones that may contain geological fissures and complex mineral transitions.
Q: Can buyers approve the slabs before shipment?
A: Project-specific approval procedures can be arranged according to the confirmed order. Current slab photographs, videos, dimensions, finish references and bundle information can be used to support remote review before shipment. Requirements should be agreed before production and packing.
Q: Where does this marble come from, and what thickness did the client order?
A: This Cipollino Ondulato marble comes from Italy. The Australian client ordered 20 slabs in 20 mm thickness with a honed finish, arranged into two bundles.
▌ Project Enquiries
Landiview Stone supports international stone contractors, importers, fabricators, designers and project teams with block and slab selection, project-specific fabrication, shop drawings, scanned-slab layout, quality control and export packing. For Cipollino Ondulato slab availability or a project quotation, send the required quantity, dimensions, thickness, finish, application, destination and preferred delivery schedule.
