Polished Sivec White marble slab with a bright white background and subtle gray veining displayed in Landiview Stone factory
Sivec White marble kitchen island and countertops with waterfall edges in a luxury custom home
Sivec White marble vanity countertop with double integrated sinks and warm wood cabinetry in a luxury bathroom
Sivec White marble floor tiles with subtle gray veining in a luxury contemporary living room
Sivec White marble wall tiles with subtle gray veining in a luxury elevator lobby
Sivec White marble interior staircase with illuminated steps and glass railings in a luxury residence
Sivec White marble bathtub deck with a mitered apron and integrated oval tub in a luxury bathroom
Sivec White marble fireplace surround and extended hearth in a luxury contemporary living room
North Macedonian Sivec White Marble Slab
- Fast Delievery
- Quality Assurance
- 24/7 Customer Service
Executive Summary
Sivec White marble is a North Macedonian natural marble for buyers seeking a bright, refined white surface with subtle gray movement. It is available through Landiview Stone as slabs or as coordinated, project-specific finished products, subject to current material and approved specifications.
Sivec White suits slab importers, distributors, fabricators, stone contractors, interior designers, developers and builders. Typical uses include kitchen islands, countertops, vanities, floors, walls, interior stairs, bathtub surrounds and fireplaces. Standard slab thickness is 18 mm; 20 mm and 30 mm slabs may be specially cut from selected blocks when project volume, block suitability and availability permit. Buyers should send dimensions, finish, quantity, application, destination and drawings, then approve current slabs and the technical scope before production.
Key Facts
The purchasing baseline is straightforward: natural marble from North Macedonia, bright white with subtle gray veining, normally supplied in 18 mm slabs, with polished or honed finishes. Actual slab size, lot appearance, treatment, yield and thicker custom-cut availability require order-specific confirmation.
| Product Attribute | Confirmed Product Information |
| Product name | Sivec White marble slab |
| Material | Natural marble; SIVEC is identified by the quarry producer as fine-grained white dolomitic marble [1]. |
| Origin | North Macedonia, associated with the Prilep quarry area [1]. |
| Visual character | Bright white background with subtle gray veining; approve the actual lot because natural range varies. |
| Standard slab thickness | 18 mm |
| Other thicknesses | 20 mm and 30 mm may be specially cut from selected blocks according to customer requirements, subject to block suitability, quantity and availability. |
| Thickness tolerance | Stated standard: ±1 mm. Measurement method and project acceptance criteria should be confirmed in the contract, drawings or inspection standard before ordering. |
| Recommended finishes | Polished and honed |
| Supply formats | Slabs; cut-to-size pieces; project-specific finished stone products. |
| Price position | Generally positioned in the medium price range, but quotations depend on current lot, selection, dimensions, yield, finish, fabrication, packing and logistics. |
| Testing | No project-specific performance values are claimed on this page. Relevant reports may be requested and requirements should be written into the purchase specification. ASTM C503/C503M covers marble dimension stone characteristics, physical requirements and sampling at specification level [2]. |
Available Finishes and Processing Options
Polished and honed are the recommended finishes. Polished emphasizes brightness and crisp gray movement, while honed creates a quieter low-sheen surface. Finish samples and current slab images should be reviewed together because finish changes color depth, reflection and the visibility of natural features.
▌ Polished Finish
Polishing gives Sivec White a clear reflective surface and brings out its bright background. It is well suited to statement islands, vanity tops, wall panels, bathtub decks and fireplaces where light reflection supports a clean, high-end interior. Buyers should review glare, etching expectations and cleaning requirements for the intended use.
▌ Honed Finish
A honed finish reduces reflection and softens the contrast between the white field and gray veins. It can support restrained contemporary interiors and may make minor etching less visually conspicuous than a high polish, although marble remains acid-sensitive. Slip resistance and flooring suitability must be evaluated against the project specification, finish sample and local requirements.
▌ Project-Specific Processing
Depending on approved drawings, Landiview Stone can coordinate cutting, edge profiles, mitred build-ups, cutouts, drilling, piece numbering and dry layout. Large openings, narrow sections and complex assemblies require fabrication and transport-risk review. For structurally or technically demanding work, dimensions, substrate, anchoring, movement joints and installation methods remain subject to the project designer, engineer and qualified installer.
Recommended Applications
Sivec White works best where a design needs luminous white natural stone without dominant heavy veining. Its restrained gray movement can visually enlarge interiors, reflect warm architectural lighting and connect broad surfaces without competing with timber, bronze, glass or darker accent stones.
▌ Kitchen Island and Kitchen Countertop
On a large island, Sivec White creates a bright architectural volume that complements warm timber cabinetry and metallic fittings. Slab selection should prioritize coordinated color, seam placement and yield across the top and waterfall ends. Because marble is calcareous and acid-sensitive, buyers should accept the possibility of etching and specify appropriate care, sealing and professional fabrication [3].
▌ Bathroom Vanity Top
The restrained veining supports a calm, spa-like bathroom and works especially well with integrated sinks, long double vanities and floating timber cabinetry. Selection should address cutout geometry, faucet positions, edge build-up, splash details and support. Factory dry layout and temporary reinforcement are useful for long tops or pieces weakened by sink openings.
▌ Floor Tiles
Large-format Sivec White floor tiles produce a continuous, light-reflective field that can make living rooms, lobbies and circulation areas appear more spacious. Buyers should plan tile orientation, shade range, grout tone and replacement allowance. Finish, thickness, substrate, slip performance and installation system must match traffic, wetness and local project requirements.
▌ Wall Tiles
Wall tiles and panels create a clean, luminous envelope, while fine gray movement prevents the surface from reading as visually flat. This is effective in elevator lobbies, reception areas and refined residential interiors. Elevation drawings, joint alignment, corner details, anchoring and substrate coordination are essential for an orderly installed composition.
▌ Interior Staircases
Sivec White treads and risers can turn a staircase into a bright sculptural feature, particularly beside glass balustrades, bronze accents or integrated lighting. Buyers should coordinate vein direction, nosing profiles, landings and adjoining floor patterns. Structural support, slip resistance, edge durability and code compliance must be resolved by the project professionals.
▌ Bathtub Deck and Surround
A Sivec White deck and surround can form a quiet monolithic frame around a bathtub. Mitred aprons help create visual thickness without requiring a solid block. The drawing set should resolve access panels, joints, support, waterproofing interfaces and faucet clearances. Sealer and maintenance choices must follow the selected product manufacturer's instructions and wet-area conditions.
▌ Fireplace
A Sivec White surround and extended hearth provide a crisp focal frame that contrasts with the dark firebox and works with warm timber interiors. Booked or intentionally aligned veins can strengthen symmetry, while quieter slabs produce a minimalist result. Clearances, heat exposure, substrate, anchoring and applicable fireplace regulations must be confirmed by qualified project professionals.
Why Choose This Stone
Choose Sivec White when the design calls for a genuine North Macedonian white marble with a bright field, restrained gray veining and a strong polished presence. Its value lies in luminous natural variation and broad application flexibility, not in engineered uniformity.
Sivec White is a classic North Macedonian white marble widely used in international architectural and interior work. Its fine visual movement is easier to combine with wood, bronze, glass and darker stones than a heavily veined statement marble. The polished surface can achieve strong gloss, while honed material offers a softer direction. The material is generally medium-priced within the white-marble market, but grade, current availability, slab size and usable yield can materially affect quotations.
- • Bright white background supports clean, light-filled interiors.
- • Subtle gray veining adds natural depth without dominating the composition.
- • Polished and honed finishes support both formal and restrained design directions.
- • Slabs can be selected for resale or coordinated into finished project components.
- • Actual slabs should be approved because natural color, veins, fissures and treatments vary by lot.
Comparison with Similar Stones
Sivec White is distinguished by a bright, relatively quiet field with fine gray movement. Carrara commonly reads grayer, Thassos is often chosen for a more uniform crystalline white appearance, and engineered quartz offers greater pattern consistency but not the geological variation of natural marble.
| Stone | Typical Visual Direction | Material Category | Typical Uses | Buyer Considerations |
| Sivec White | Bright white field with subtle gray veining | Natural dolomitic marble [1] | Slabs, countertops, vanities, floors, walls, stairs, bathtub surrounds and fireplaces | Approve actual slabs, finish, natural range, usable yield and fabrication plan; marble remains acid-sensitive. |
| Bianco Carrara | White to light-gray background with soft gray veining | Natural marble | Countertops, vanities, tiles, walls and architectural details | Often visually grayer than Sivec; compare actual lots rather than relying on trade names. |
| Thassos White | Generally crystalline white with limited visible movement in selected grades | Natural dolomitic marble | Bathrooms, walls, floors and decorative interiors | Selection level and crystalline character influence appearance and price; approve current material. |
| White engineered quartz | More controlled and repeatable white or lightly veined pattern | Engineered surface, not natural marble | Countertops and interior surfaces within manufacturer limitations | Offers consistency but a different visual character; verify heat, UV, fabrication and warranty limits with the manufacturer. |
Frequently Asked Questions
Most purchasing risks can be reduced by confirming the current slab lot, written tolerances, approved drawings, finish, fabrication scope, inspection method and packing plan before production. The answers below state Landiview Stone's normal workflow; final terms remain order-specific.
Q: Can you provide Sivec White marble samples?
A: Yes. Normally one or two samples can be provided without a sample charge, with typical sizes from 100 × 100 mm to 200 × 200 mm. Courier cost is paid by the customer, and availability depends on the current material. A small sample is useful for reviewing finish, basic color and surface character, but cannot represent the full movement or natural range of a slab. Slab buyers and project buyers should also review current slab photos or videos before approval.
Q: What is your Sivec White slab thickness tolerance?
A: The stated standard thickness tolerance is ±1 mm. Before ordering, the buyer should confirm the required nominal thickness, measurement locations, measuring equipment, surface condition and acceptance method in the contract, approved drawings or inspection standard. Fabricated assemblies, calibrated tiles or pieces that interface with other materials may require project-specific criteria rather than reliance on a general slab tolerance alone.
Q: How do you inspect Sivec White slab surface quality?
A: Inspection focuses on cracks that may affect handling or fabrication, overall visual coordination, unusually large discordant dark areas, surface condition, and color and vein variation against the buyer-approved range. Natural veins, mineral marks, pores and stable fissures must be distinguished carefully from structural cracks or fabrication defects. Acceptance should reflect the stone's natural character, intended cuts and the written selection standard rather than an expectation of manufactured uniformity.
Q: Can I see current slab photos and videos before ordering?
A: Yes, subject to actual stock. Landiview Stone can provide current-lot slab photos or videos, slab numbers, surface-review information and an explanation of the available color and vein range. Buyers should identify whether the approval is for general range, individually numbered slabs or a specific cutting plan. Lighting and screens can affect color perception, so physical samples and written acceptance criteria remain useful when color sensitivity is high.
Q: Can you supply cut-to-size and finished products, not only slabs?
A: Yes. The normal workflow starts with architectural drawings, from which the technical team develops stone shop drawings for review. Current slab images are submitted; if the material is unsuitable, block selection and special slab cutting may be investigated where project conditions permit. After drawings and slabs are approved, slab scans are used in AutoCAD for cutting and vein-layout simulation. Following approval, pieces are fabricated, dry laid, inspected, replaced where required, numbered, protected at vulnerable locations and export packed. See how to order cut-to-size stone from China.
Q: Can Landiview Stone prepare stone shop drawings from architectural drawings?
A: Yes. Landiview Stone can review architectural information, identify the stone scope and prepare stone shop drawings showing relevant dimensions, thicknesses, cutouts, edge details, visible faces, finishes, joints and fabrication information. Drawings are issued for client and design-team review before production. They do not replace the structural, waterproofing, code or installation responsibilities of locally licensed professionals. See what cut-to-size stone means in a project workflow.
Q: How do you help control the final vein layout and installed appearance?
A: Approved slab scans can be imported into AutoCAD to simulate cut locations, vein direction and relationships between adjoining pieces before cutting. After fabrication, factory dry layout checks the real pieces, supports replacement decisions and enables piece numbering against installation drawings. This reduces information loss between design and production, but does not guarantee identical visual perception because natural variation, lighting, joints and site installation affect the result. See natural stone slab layout in AutoCAD.
Q: How do you protect slabs and finished stone during shipping?
A: Slabs use a robust export crate or A-frame/support arrangement designed for the actual container plan. Finished products may use liners, cushioning, custom foam, plywood separation, edge protection and positioning elements. Sink or cooktop cutouts, narrow backsplashes, thin strips, vanity tops, fireplace parts, narrow wall panels and vulnerable corners may receive removable support strips over protective film. Reinforcement is temporary transport protection and must be removed before installation as instructed. Regulated wood packaging should use ISPM 15-compliant material according to destination requirements [4]. See how natural stone is protected during shipping.
Q: How should installed Sivec White marble be maintained?
A: Use a pH-neutral cleaner intended for natural stone, blot spills promptly, rinse as required and avoid unknown acidic or alkaline chemicals and abrasive tools. Marble is calcareous and can etch when exposed to acids. Sealer selection and reapplication intervals depend on the stone, finish, use, exposure and sealer manufacturer's instructions; sealing does not make marble acid-proof. Follow the project specification and care guidance from the installer and product manufacturer [3].
Q: What slab thicknesses are available?
A: The standard slab thickness stated for this product is 18 mm. Where a project requires 20 mm or 30 mm, Landiview Stone can investigate selecting suitable blocks and arranging custom slab cutting. The feasibility depends on current block availability, required volume, dimensions, grade, processing plan and commercial terms. Buyers should not assume that every slab lot can be matched across all thicknesses.
Q: Is Sivec White marble suitable for kitchen countertops?
A: It can be used for kitchen countertops when the client accepts natural marble's patina, possible staining and acid-etching behavior. The bright white surface and light gray movement create an elegant, luminous island, but care expectations should be discussed before selection. Specify appropriate support, cutout geometry, edge details, fabrication, sealing and professional installation. Use trivets and boards, clean spills promptly and follow the cleaner and sealer manufacturers' instructions [3].
Q: What affects the price of Sivec White marble?
A: Pricing is project-specific. Key variables include current slab or block availability, grade and visual selection, slab dimensions, usable yield, thickness, finish, surface treatment, quantity, cutting complexity, mitres, edge work, cutouts, shop drawings, vein layout, dry layout, replacement allowance, packing and destination logistics. For a meaningful comparison, request quotations against the same approved slabs, dimensions, fabrication scope, inspection standard and shipping terms rather than comparing only a square-metre rate.
Why Landiview Stone
Landiview Stone supports two distinct buying needs: slabs for importers, distributors and fabricators, and project-specific cut-to-size or finished products for contractors, developers, designers and builders. The technical workflow is designed to make approved information traceable from drawings and slabs through fabrication, inspection, numbering and packing.
▌ Slab Supply Support
For slab buyers, support can include current slab selection, slab-image review, color and vein-range confirmation, surface inspection, slab identification and export packing. Availability, slab dimensions and selection are confirmed against the actual lot.
▌ Cut-to-Size Workflow
- 1. Review architectural drawings and identify the stone scope.
- 2. Prepare stone shop drawings for client and design-team approval.
- 3. Submit available slabs; if unsuitable, investigate block selection and special slab cutting when appropriate.
- 4. Use approved slab scans in AutoCAD to simulate cutting and vein layout before production.
- 5. Fabricate to approved documents, then dry lay, inspect and number finished pieces.
- 6. Replace nonconforming pieces when required while considering adjacent color and veining.
- 7. Apply project-specific protection, including temporary reinforcement for vulnerable geometry, before export packing.
▌ Complex Stone Assemblies
For complex fabricated and assembled products, the technical team may use three-dimensional modeling and virtual assembly to review component relationships, material thicknesses, surface treatments, concealed reinforcement, cutout positions, internal clearances and potential interference before fabrication details are finalized. Final structural, installation and code decisions remain with the responsible project professionals.
▌ Relevant International Project Experience
- • Marble furniture, bathroom vanity tops and shower wall panels for the Grand Hyatt Singapore renovation project
- • Stone supply for stations on Singapore's Thomson-East Coast Line
- • Interior stone products for the Wynn project in the United Arab Emirates
- • Marble products for public areas of the 255 East 77th Street luxury residential project in New York
- • Interior and exterior marble and granite products for three high-end custom homes on Tuckahoe, a private resort island in Massachusetts, USA
Request A Quote
Send Landiview Stone the required slab or finished-piece dimensions, thickness, quantity, finish, application and delivery destination. Include architectural drawings, stone schedules or shop drawings when available, and identify any visual selection, matching, tolerance or inspection requirements. Landiview Stone can check current slab availability, provide current-lot photos or videos, and quote project-specific fabrication.
Hot Tags: Sivec White marble slab, Sivec marble supplier, North Macedonia white marble, white marble slabs, Sivec marble countertops, cut-to-size marble, Landiview Stone, Bianco Athena Earl White Marble, Bianco Carrara Gioia Slabs, Bianco Dolomiti Marble, Namibia Fantasy Marble, Panda White Marble For Interior Decoration, Purple Marble
You Might Also Like
Send Inquiry