Ajax Marble slab with a warm white background and soft gray diagonal veining displayed at Landiview Stone factory
Large-format Ajax Marble slabs with white and soft gray diagonal veining during factory fabrication
Ajax Marble kitchen countertop and waterfall island with mitered edges, matching backsplash, and warm wood cabinetry in a luxury custom home
Ajax Marble bathroom vanity top with a double integrated trough sink, mitered edges, warm wood cabinetry, and wall-mounted brass faucets
Large-format Ajax Marble floor tiles with visible grout joints in a luxury custom home living room with warm wood finishes
Ajax Marble interior staircase with mitered treads, illuminated risers, warm wood side panels, and glass railings in a luxury custom home
Ajax Marble bathtub deck with mitered edges, full-height stone panels, and a brass floor-mounted faucet in a luxury primary bathroom
Ajax Marble linear fireplace surround with layered mitered stone panels and a warm wood feature wall in a luxury living room
Greek Ajax Marble Slab
- Fast Delievery
- Quality Assurance
- 24/7 Customer Service
Executive Summary
Ajax Marble is a Greek natural marble, also known in the trade as Volakas White Marble. Its warm white field and soft gray movement suit buyers seeking a recognizable white-marble look at a generally accessible commercial price position, while actual cost remains dependent on slab selection, yield, thickness, finish, fabrication and logistics.
Landiview Stone supplies Ajax Marble slabs to importers, distributors and fabricators, and custom cut-to-size or finished products to contractors, developers, interior designers and builders. Recommended uses include countertops, islands, vanities, floor and wall tiles, interior staircases, bathtub surrounds and fireplaces. Buyers should approve current slabs or block-derived material, agree the finish and thickness, and define fabrication, inspection and packing requirements before production. This classic white marble is widely recognized and used internationally, but natural color, vein density and usable yield vary from lot to lot.
Key Facts
The procurement baseline is straightforward: natural marble from Greece, warm white with soft gray veining, normally offered in 18 mm slabs, with polished or honed finishes. Any 20 mm or 30 mm requirement should be coordinated through suitable block selection and special slab cutting rather than assumed to be stock.
| Buyer Checkpoint | Confirmed Product Information |
| Product name | Ajax Marble slab |
| Alternative trade name | Volakas White Marble |
| Material | Natural marble |
| Origin | Greece. Volakas stone is associated with the Volakas and Drama area of Greece; source documentation for the selected lot remains subject to order review. [1] |
| Color and movement | Warm white background with soft gray veining; natural range and diagonal movement should be approved from current slabs. |
| Standard slab thickness | 18 mm |
| Other thicknesses | 20 mm and 30 mm may be specially cut by selecting suitable blocks, depending on project requirements and current material availability. |
| Stated thickness tolerance | ±1 mm; confirm the measurement method and project acceptance criteria in the contract, drawings or inspection standard before ordering. |
| Recommended finishes | Polished and honed |
| Supply forms | Slabs, cut-to-size pieces and project-specific finished products, subject to scope review. |
| Commercial position | A classic white marble widely used in global markets and generally not positioned as an exceptionally expensive white marble. Quotations remain lot- and scope-specific. |
Available Finishes and Processing Options
Choose polished Ajax Marble for stronger reflection and clearer vein definition, or honed Ajax Marble for a lower-sheen architectural surface. Finish samples should be approved because gloss level, color depth, touch and maintenance behavior change with the finish and the selected stone lot.
▌ Polished Finish
Polishing increases light reflection and usually makes gray veining appear more defined. It works well for vertical features, vanity tops, bathtub decks and statement countertops. Buyers should define the required gloss reference, visible-face direction, edge finish and acceptable natural characteristics. Acidic substances can etch marble even when the surface is polished, so polished does not mean stain-proof or maintenance-free.
▌ Honed Finish
Honing produces a flatter, lower-reflection appearance that can make the warm white ground feel quieter. It is often considered for floors, stairs and contemporary wall work. Slip performance cannot be inferred from the word "honed" alone; the project team should specify required testing, traffic conditions, wet-area criteria and local code compliance.
▌ Custom Fabrication Options
Depending on approved drawings, fabrication can include cut-to-size panels, mitred built-up edges, straight or profiled edges, sink and cooktop cutouts, backsplash pieces, stair components, fireplace parts, bathtub panels, piece numbering and dry layout. Large openings may be evaluated for a semi-cutout approach when material, geometry, transport and site completion conditions permit. All retained connections and site responsibilities should be shown in approved documents.
Recommended Applications
Ajax Marble can create a consistent white-and-gray material language across kitchens, bathrooms, floors, stairs and feature elements. Suitability depends on the selected lot, piece dimensions, support, traffic, exposure, detailing and maintenance expectations, not on the commercial stone name alone.
▌ Kitchen Island and Kitchen Countertop
The warm white field can brighten cabinetry while diagonal gray movement gives a long island visual direction. Approve slabs with the complete island, waterfall ends, seams and backsplash in mind. Marble is calcareous and can etch from acidic food or cleaners, so the owner should accept patina and use appropriate care. Large sink or cooktop openings need sufficient remaining stone, suitable support and careful transport planning. A semi-cutout may be considered for vulnerable openings, with final cutting assigned to qualified site personnel.
▌ Bathroom Vanity Top
Ajax Marble coordinates naturally with warm timber, metal fixtures and neutral wall finishes. Confirm basin type, faucet specification, spout reach, backsplash, cabinet clearances and sink template before approval. Integrated or assembled stone sinks require additional joint, drainage, waterproofing and support coordination. Narrow rails surrounding a basin opening may need temporary shipping reinforcement.
▌ Floor Tiles
Large-format tiles can extend the white background across residential or hospitality interiors while visible grout joints organize the layout. The tile module, vein range, dry layout, substrate, movement joints, lippage criteria and slip requirements should be coordinated before cutting and installation. Abrasive grit can dull marble floors, and entrance mats plus regular dust removal help reduce wear. Use a qualified installer and follow project specifications and local requirements.
▌ Wall Tiles
Wall tiles and large panels can use the diagonal veins as continuous movement or as a deliberately varied composition. Buyers should review elevation drawings, joint width, piece numbering, anchorage or adhesive system, substrate and wet-area requirements. For large or overhead units, attachment design belongs with the responsible project professionals and must address stone, support and interfacing systems.
▌ Interior Staircases
Stair treads and risers can carry the gray veins through a highly visible circulation element. Define tread thickness, nosing profile, riser joints, support, slip criteria, lighting interfaces and vein direction in approved shop drawings. Long treads and mitred edges require careful handling, and the finished assembly should comply with applicable structural, accessibility and building rules.
▌ Bathtub Deck
A coordinated deck, apron and wall surround can turn the soft gray movement into a continuous bathroom composition. Drawings should show access panels, faucet penetrations, tub clearances, mitred corners, waterproofing interfaces and support. Marble care in wet areas includes regular removal of residues with stone-compatible products and quick drying where practical. Waterproofing and plumbing remain the responsibility of appropriate project trades.
▌ Fireplace
Ajax Marble works as a pale surround against timber, plaster or darker finishes. Slab layout should coordinate the opening, returns, hearth, seams and mitred corners. The design team must confirm clearances, substrate, anchorage, expected temperatures and compatibility with the specific fireplace system and local code. Natural marble should not be represented as a substitute for required fire-rated construction.
Why Choose This Stone
Choose Ajax Marble when a project needs genuine Greek white marble with warmer undertones and softer gray movement than a stark, uniform white surface. Its practical appeal is the combination of a familiar international design language, broad interior application range and a generally approachable price position among decorative white marbles.
- • Recognizable natural character: every slab carries geological variation rather than a repeated manufactured print.
- • Design versatility: the white-and-gray palette coordinates with warm wood, metal, glass and neutral cabinetry.
- • Multiple supply routes: buyers can source slabs or coordinate cut-to-size and finished products from approved material.
- • Thickness flexibility: 18 mm is standard, while suitable blocks can be investigated for special 20 mm or 30 mm slab cutting.
- • Layout potential: diagonal movement can be planned across islands, stair runs, wall elevations and assembled features.
"Affordable" should not be interpreted as a fixed price. Current block or slab availability, selection grade, dimensions, usable yield, finish, treatment, fabrication, replacement allowance, packing and destination logistics all affect the quotation. Request like-for-like commercial scopes when comparing suppliers.
Comparison with Similar Stones
Ajax Marble sits between calm gray-veined classics and more dramatic premium white marbles. The right comparison should use actual slabs, finish, usable yield, required matching and application risk rather than relying only on names, because trade names and selection grades can vary among suppliers.
| Stone | Typical Visual Direction | Material Category | Typical Uses | Buyer Considerations |
| Ajax Marble / Volakas White | Warm white background with soft to defined gray diagonal veining | Greek natural marble | Countertops, vanities, floors, walls, stairs, bathtub surrounds and fireplaces | Approve current slabs, vein range, usable yield, thickness, finish and any resin or mesh treatment. |
| Carrara Marble | Light gray to white field with generally finer gray movement | Italian natural marble | Tiles, vanities, countertops, stairs and architectural interiors | Commercial grades and background tone vary widely; compare actual lots and maintenance expectations. |
| Calacatta Marble | Whiter field with bolder, more widely spaced gray or gold veining, depending on variety | Italian natural marble | Feature islands, walls, fireplaces and luxury interiors | Often selected for dramatic composition; yield and matching can materially affect cost. |
| Thassos Marble | More uniform, bright crystalline white with limited veining | Greek natural marble | Floors, walls, bathrooms and decorative work | Choose when whiteness and uniformity matter more than flowing gray movement; verify lot consistency. |
| Engineered Quartz with Marble Look | Controlled printed or pigmented white-and-gray pattern | Manufactured surfacing material | Interior countertops and vanities, subject to product instructions | More repeatable appearance, but not natural marble; verify heat, UV, installation and warranty limitations with the manufacturer. |
All natural marbles are acid-sensitive to some degree. Application decisions should be based on approved samples or slabs, project-specific testing where required, and the expectations of the owner and design team.
Frequently Asked Questions
Most Ajax Marble purchasing risk is controlled before cutting: define the application, approve current material, confirm thickness and tolerance, coordinate drawings and layout, then document inspection and packing. The answers below state the normal workflow without implying current stock, fixed lead time or universal suitability.
Q: Can you provide Ajax Marble samples?
A: Yes. Normally one or two samples can be provided without a sample charge, with typical sizes from 100 × 100 mm to 200 × 200 mm. Courier cost is paid by the customer, and sample availability depends on the current material. A small sample is useful for checking finish, basic color family and surface character, but it cannot represent the movement of a full slab. Buyers should also approve current slab photos, videos or scans before ordering.
Q: What is your Ajax Marble slab thickness tolerance?
A: The stated standard thickness tolerance is ±1 mm. Before ordering, the buyer should confirm the measurement method, sampling approach and acceptance requirement in the contract, approved drawings or project inspection standard. Finished thickness can also be affected by calibration, surface processing and fabrication requirements, so nominal thickness and acceptance criteria should not be treated as interchangeable.
Q: How do you inspect Ajax Marble slab surface quality?
A: Inspection focuses on cracks that may affect handling or fabrication, overall pattern coordination, unusually large discordant black areas, surface condition, and color or vein variation against the buyer-approved range. Inspectors should distinguish normal mineral movement, natural fissures and accepted treatment from structural cracks or processing defects that can affect use. Acceptance criteria should be agreed for the actual product form because slabs, tiles and assembled pieces do not present the same risks.
Q: Can I see current Ajax Marble slab photos and videos before ordering?
A: Yes, subject to actual stock. Landiview Stone can provide current-lot slab images or videos, slab numbers, surface observations and a review of the available color and vein range. Buyers should identify the intended application and required matching so the review can focus on useful dimensions, vein direction, visually sensitive areas and potential yield rather than color alone.
Q: Can you supply cut-to-size and finished products, not only slabs?
A: Yes. The usual workflow starts with the client's architectural drawings. Landiview Stone prepares stone shop drawings for review, submits available slab images and, if those are unsuitable, may investigate block selection and special slab cutting according to project needs. After shop drawings and slabs are approved, slab scans are used in AutoCAD for cutting and vein-layout simulation. Following approval, the factory fabricates, dry lays, inspects, replaces nonconforming pieces where required, numbers pieces and applies protection, temporary reinforcement and export packing for vulnerable areas. See how to order cut-to-size stone from China.
Q: Can Landiview Stone prepare stone shop drawings from architectural drawings?
A: Yes. The technical team can identify the stone scope and prepare shop drawings showing relevant dimensions, thicknesses, cutouts, edge details, visible faces, finishes, joints and fabrication information for client and design-team review. Approved stone shop drawings coordinate production, but they do not replace the structural, code, waterproofing or installation responsibilities of locally licensed professionals. Read what cut-to-size stone means for project procurement.
Q: How do you help control the final vein layout and installed appearance?
A: Approved slab scans are placed into AutoCAD to simulate cut positions, grain direction and relationships between adjacent pieces before physical cutting. After fabrication, factory dry layout checks the actual pieces, supports replacement decisions, and enables piece numbering aligned with installation drawings. This process reduces information gaps and helps align production with the approved composition, but natural variation, lighting, joints and site installation can still affect the final appearance. See the guide to natural stone slab layout in AutoCAD.
Q: How do you protect slabs and finished stone during shipping?
A: Slabs use sturdy export wood frames, crates or A-frame/support arrangements designed for the actual container load. Finished products may use liners, cushioning, custom foam, separators, edge protection and positioning supports based on geometry. Sink or cooktop cutouts, narrow backsplashes, strips, vanity tops, fireplace parts, narrow wall panels and fragile corners may receive removable support strips over protective film. This reinforcement is temporary and should be removed before installation according to instructions. Regulated raw-wood packaging should use ISPM 15-compliant material where required by the destination. [3] See how natural stone is protected during shipping.
Q: How should installed Ajax Marble be cleaned and maintained?
A: Use a pH-neutral stone cleaner or another marble-compatible cleaner, blot spills promptly, rinse as directed and avoid unidentified acidic or alkaline products and abrasive tools. The Natural Stone Institute notes that calcareous stones are acid-sensitive and recommends mild non-acidic cleaning, prompt spill response and manufacturer directions. [4] Sealer type and reapplication interval depend on the stone, finish, exposure and sealer manufacturer's instructions. Follow project specifications and consult a qualified stone-care professional for stains, etching or restoration.
Q: Is Ajax Marble the same as Volakas White Marble?
A: Ajax Marble is used as an alternative trade name for Volakas White Marble. Trade naming and selection labels are not fully standardized, so a name alone should not define the approved material. Confirm Greece as the source for the quoted lot and review actual slabs, background tone, vein pattern, dimensions, treatments and documentation before purchase. [1]
Q: Is Ajax Marble suitable for kitchen countertops?
A: It can be used for kitchen islands and countertops when the owner accepts the care profile of natural marble. Marble can etch from lemon, vinegar, wine and acidic cleaners, while oils and pigments may stain depending on exposure and protection. Specify support, seams, cutouts and edge details, use boards and trivets, clean spills promptly and follow the sealer manufacturer's guidance. The material should not be marketed as scratch-proof, stain-proof or maintenance-free.
Q: What affects the price of Ajax Marble slabs and fabricated products?
A: Price is project-specific. Important variables include current block or slab availability, selection range, slab dimensions and usable yield, thickness, finish, resin or mesh treatment, cut complexity, edge work, cutouts, dry layout, replacement allowance, packing and destination logistics. For a meaningful comparison, send the same dimensions, quality criteria, finish and delivery terms to each supplier rather than comparing only a headline square-metre rate.
Q: Can you supply 20 mm or 30 mm Ajax Marble slabs?
A: Landiview Stone can investigate suitable block selection and special slab cutting for 20 mm or 30 mm requirements. Availability is not assumed because the standard slab thickness stated for this offer is 18 mm. The inquiry should identify required net thickness, finish, dimensions, quantity and tolerance so block suitability, yield, processing allowance and commercial feasibility can be reviewed before quotation.
Q: What information should I send for an accurate Ajax Marble quotation?
A: Send the required supply form, dimensions, thickness, quantity, finish, application, visible faces, edge details, cutouts, matching expectations, drawings and delivery destination. State whether the request is for slabs, cut-to-size pieces or fully fabricated products. If current slab approval, shop drawings, AutoCAD vein layout, dry layout, special reinforcement or destination-specific packing is required, identify those services in the inquiry so the quotation can reflect the same scope.
Why Landiview Stone
Landiview Stone serves two procurement models: natural stone slabs for importers, distributors and fabricators, and project-specific cut-to-size or finished products for contractors, developers, designers, builders and other project buyers. The technical workflow is intended to reduce avoidable gaps between drawings, selected slabs, factory production, packing and site installation.
▌ Support for Slab Buyers
Services can include current-slab selection, slab-image review, confirmation of the offered color and vein range, surface inspection, slab identification and export packing. Current availability, slab dimensions and treatments are confirmed against the actual lot rather than inferred from a catalogue image.
▌ Workflow for Cut-to-Size and Custom Fabrication
- 1. Review architectural drawings and identify the stone scope.
- 2. Prepare stone shop drawings for client and design-team approval.
- 3. Submit available slabs; if unsuitable, investigate block selection and special slab cutting when appropriate.
- 4. Use approved slab scans in AutoCAD to simulate cutting and vein layout before production.
- 5. Fabricate to approved documents, then dry lay, inspect and number finished pieces.
- 6. Replace nonconforming pieces when required while considering adjacent color and veining.
- 7. Apply project-specific protection, including temporary reinforcement for vulnerable geometry, before export packing.
For complex fabricated and assembled products, individual components may be modeled and virtually assembled in Autodesk Inventor or SolidWorks. The review can examine component relationships, material thicknesses, surface treatments, concealed reinforcement, internal clearances and potential interference before fabrication details are finalized.
▌ Selected International Project Experience
- • Marble furniture, bathroom vanity tops and shower wall panels for the Grand Hyatt Singapore renovation project
- • Stone supply for stations on Singapore's Thomson-East Coast Line
- • Interior stone products for the Wynn project in the United Arab Emirates
- • Marble products for public areas of the 255 East 77th Street luxury residential project in New York
- • Interior and exterior marble and granite products for three high-end custom homes on Tuckahoe, a private resort island in Massachusetts, USA
Request A Quote
Planning to import Ajax Marble slabs, or do you need Greek white marble fabricated to project drawings? Send Landiview Stone the required dimensions, thickness, quantity, finish, application, matching expectations and delivery destination. Include architectural drawings, stone schedules or fabrication details when available.
The team can respond with current material availability, relevant slab photos or videos and a scope-based quotation. For qualified project orders, the requested scope may also include stone shop drawings, scanned-slab AutoCAD vein layout, factory dry-layout inspection, piece numbering, temporary transport reinforcement and project-specific export packing. Availability, program and pricing are confirmed after the inquiry is reviewed.
Hot Tags: Ajax Marble slab, Volakas White Marble, Greek white marble, natural marble supplier, Ajax Marble countertop, cut-to-size marble, Landiview Stone
You Might Also Like
Send Inquiry