▌ Executive Summary
Landiview Stone is producing 1,000 sets of custom-fabricated Calacatta White engineered quartz shower wall panels with 15mm thickness for an apartment development in Canada. Each four-panel set is fabricated and inspected according to the approved shop drawings, with attention to dimensions, panel sequencing, surface quality, protection and export packing.
▌ News Release
XIAMEN, China, July 29, 2026 - Landiview Stone is currently fabricating 1,000 sets of Calacatta White engineered quartz shower wall panels for an apartment project in Canada. The project requires a coordinated production process covering shop drawing review, panel fabrication, set-by-set organization, quality inspection, surface protection and export packing. For a project of this scale, production capacity is only one part of the requirement. Maintaining consistency across 1,000 individual shower units is equally important.
Project Scope
Each shower wall set consists of four polished quartz panels, fabricated from 15 mm Calacatta White engineered quartz. According to the project shop drawings, the four panels form an overall wall area measuring approximately:
• Overall width: 10'-4"
• Overall height: 6'-0"
• Material: Calacatta White engineered quartz
• Thickness: 15 mm
• Finish: Polished
• Panels per set: Four
• Total quantity: 1,000 sets
• Project location: Canada
The panel widths are planned in accordance with the approved layout so that the completed wall assembly can meet the project's dimensional and installation requirements.
From Shop Drawings to Production
Before fabrication begins, the Landiview Stone team reviews the architectural information and approved shop drawings to confirm the panel sizes, joint locations, material specifications and finishing requirements.
The fabrication information is then translated into production instructions for cutting, edge processing, identification and packing.
For repetitive apartment units, clear shop drawings and consistent production documentation help reduce variation between sets and provide a reliable reference throughout fabrication and inspection.
Panel Layout and Visual Inspection
After fabrication, the four panels from each shower wall set can be laid out together for visual inspection. This process allows the production and quality-control teams to review:
• Overall panel dimensions
• Joint positions
• Surface appearance
• Calacatta-style vein distribution
• Panel sequence
• Edge condition
• Polished finish
• Visible fabrication defects
Because engineered quartz patterns can vary across a slab, laying the panels out as a complete set provides a clearer view of the final wall appearance than inspecting each panel separately.
The panels are then identified according to their corresponding set and installation sequence.
Consistency Across 1,000 Shower Units
Large residential projects require more than the ability to fabricate an individual sample successfully. The same dimensional and quality requirements must be repeated throughout the complete production quantity. For this 1,000-set quartz shower wall package, our production control focuses on:
1. Following the approved shop drawings
2. Maintaining consistent fabrication dimensions
3. Checking the polished surfaces and finished edges
4. Keeping the four panels in each set properly organized
5. Applying clear identification for project coordination
6. Protecting finished surfaces and exposed edges
7. Preparing the panels for international transportation
This set-based approach helps maintain traceability from production through packing and supports more efficient handling when the panels reach the project site.
Protection and Export Packing
Large-format quartz wall panels require careful handling during internal movement, packing and transportation. After inspection, the finished panels are protected to reduce the risk of scratching, edge damage and panel-to-panel contact. Each set is organized and prepared according to the project's packing requirements before shipment. The packing plan must consider not only the strength of the external crate or support structure, but also the arrangement of the panels inside the package. Proper separation, cushioning, identification and load distribution are important parts of preparing fabricated quartz components for export.
Supporting Large-Scale Residential Projects
This Canadian apartment project demonstrates Landiview Stone's ability to combine stone fabrication with the documentation and production coordination required for repetitive residential units.
Our project support can include:
• Shop drawing preparation and review
• Material quantity takeoffs
• Slab and panel layout planning
• Custom cutting and fabrication
• Panel identification and sequencing
• Pre-shipment inspection
• Surface and edge protection
• Custom export packing
• Coordination of stone packages for multifamily projects
In addition to engineered quartz shower wall panels, Landiview Stone supplies and fabricates stone products for kitchens, bathrooms, public areas and other applications in residential, hospitality and commercial projects.
Frequently Asked Questions
Q: How are the four panels in each shower set kept together?
A: Each panel is assigned a set number and installation sequence before packing. The identification system helps prevent panels from different apartment units being mixed during shipment and site distribution.
Q: Why are the panels inspected as a complete set?
A: Inspecting the four panels together allows the QC team to evaluate joint positions, panel sequence, surface consistency and the overall Calacatta-style vein layout.
Q: Why was 15 mm quartz selected for the shower wall panels?
A: The 15 mm thickness was selected in accordance with the approved project specifications and shop drawings. For this application, it provides the required panel format while helping control the overall weight of the four-panel wall assembly compared with thicker quartz slabs. The final thickness for any shower wall project should be determined according to the panel dimensions, supporting substrate, fixing method, handling requirements and applicable project specifications.
Q: How does Landiview Stone maintain consistency across 1,000 shower wall sets?
A: Production is organized according to the approved shop drawings, panel dimensions and set-by-set identification system. The four panels belonging to each shower unit are fabricated, inspected and labeled as one coordinated set. Dimensional checks, surface inspection, panel sequencing and packing identification are applied throughout production to reduce variation and prevent panels from different apartment units from being mixed during transportation or site distribution.
Planning a Stone or Quartz Package for Your Next Project?
If you are a developer, general contractor, stone contractor, cabinet company or project procurement team looking for a fabrication partner for a multifamily, hospitality or commercial project, Landiview Stone would be pleased to review your drawings and project requirements.
Send us your architectural drawings, material specifications, quantity schedule or stone scope, and our team can help evaluate the fabrication and packing requirements.
