Iranian Pietra Grey Marble Slab

Pietra Grey is an Iranian natural marble with a medium-gray to dark-gray background and distinctive white veining. It gives residential and commercial interiors a composed, architectural character without relying on an excessively ornate pattern. Landiview Stone supplies slabs and project-specific fabricated products, subject to current material availability and approved specifications.

Pietra Grey marble is intended for importers, distributors, fabricators, stone contractors, interior designers, developers and builders seeking a recognizable gray marble for coordinated interior applications. Standard slabs are 18 mm thick; 20 mm and 30 mm can be considered through suitable block selection and special cutting. Polished and honed finishes are recommended. Procurement should be based on current slab approval, usable yield, finish, thickness, fabrication scope and export-packing requirements.

The key procurement facts are straightforward: Pietra Grey is natural marble from Iran, normally offered by Landiview Stone in 18 mm slabs with polished or honed finishes. Buyers should approve the actual slab range because background tone, vein density and natural features vary between slabs and lots.

ASTM C503/C503M describes dimension marble as stone produced as blocks, slabs or tiles and addresses material characteristics, physical requirements and sampling. No lot-specific ASTM test value is claimed on this page; test documentation should be requested and reviewed for the selected material where the specification requires it [2].

Choose polished Pietra Grey for stronger contrast and reflection, or honed Pietra Grey for a quieter, lower-sheen architectural surface. Finish approval should use a representative sample from the intended lot because finish changes the apparent gray tone, vein contrast and visibility of natural features.

▌ Polished Finish

Polishing deepens the gray field and sharpens the white-vein contrast. This finish works well where a reflective, formal appearance is desired, including feature walls, vanity tops, fireplace surrounds and selected floors. Lighting and viewing angle can make surface variation more visible, so buyers should review finished current material.

▌ Honed Finish

Honing produces a smooth, matte-to-low-sheen appearance. It softens strong reflections and gives Pietra Grey a more restrained contemporary character. Honed marble can show handling marks, oils or localized wear differently from polished marble, so the finish, cleaning regime and application should be agreed before production.

▌ Project-Specific Processing

• • Cut-to-size panels, tiles, stair components, vanity tops, countertops, bathtub parts and fireplace components.
• • Edge profiling, mitered assemblies, sink or cooktop cutouts, piece numbering and dry-layout inspection according to approved drawings.
• • AutoCAD cutting and vein-layout simulation based on approved slab scans for projects where visual continuity is important.
• • Three-dimensional modeling and virtual assembly review may be used for complex multi-part products to check relationships, clearances, reinforcement and potential interference before details are finalized.

Pietra Grey works best when its gray field establishes visual continuity and its white veins are deliberately positioned. The material can create either a monolithic statement or a rhythm of coordinated panels. Application decisions should therefore address slab selection, vein direction, joints, edge construction, lighting and the care expectations of natural marble.

▌ Kitchen Island and Kitchen Countertop

Pietra Grey creates a confident charcoal-gray work surface that pairs naturally with dark timber, warm metal, pale cabinetry or restrained concrete tones. A waterfall end or full-height backsplash can extend the same vein language across vertical and horizontal planes. Select slabs around sink and cooktop openings carefully, and coordinate support, cutout geometry, seam positions and marble-care expectations.

▌ Bathroom Vanity Top

The dark gray ground gives bathroom joinery a precise, furniture-like appearance, while white veins keep a long vanity from appearing visually flat. Integrated or conventional sinks can be coordinated with mitered fascia panels for a substantial look. Review bowl geometry, wall-mounted faucet reach, backsplash height, drainage, joints and temporary transport reinforcement.

▌ Floor Tiles

Pietra Grey floor tiles create a continuous, formal gray base that allows lighting, metalwork and furniture to stand out. Polished tiles provide reflection and visual depth; honed tiles create a calmer surface. Tile module, vein distribution, slip performance, traffic, substrate, movement joints and maintenance must be assessed for the project and local requirements.

▌ Wall Tiles

On elevator lobbies, corridors, bathrooms and feature walls, rectangular Pietra Grey panels produce an ordered grid with fine white movement across the elevation. Joint alignment and vein orientation can make the installation appear deliberate rather than random. Confirm panel format, anchoring or setting method, backing conditions and professional installation requirements.

▌ Interior Staircases

Pietra Grey treads and risers give an interior staircase a sculptural, continuous gray profile. Linear white veins become especially effective when the direction is coordinated across successive steps and landings. Review tread thickness, nosing detail, slip resistance, lighting, substrate, structural support and local code requirements before fabrication.

▌ Bathtub Deck and Surround

Pietra Grey can turn a bathtub deck and surround into a single architectural volume. Mitered corners and aligned wall panels emphasize mass and continuity, while the dark surface contrasts with a light bathtub. Coordinate access panels, waterproofing interfaces, joints, fixture penetrations and sealant with the project team; stone does not replace the required waterproofing system.

▌ Fireplace

A Pietra Grey surround and hearth create a strong central frame with controlled white movement. Mitered edges can make the stone appear thicker and more monolithic. The assembly must follow the fireplace manufacturer's clearances, substrate requirements, applicable codes and professional installation details; heat exposure and joint design should be resolved before fabrication.

Pietra Grey is valuable because it combines a classic neutral gray palette, recognizable white veining and broad interior versatility at a generally accessible position within the decorative-marble market. It is widely recognized in international stone trade and design, but any claim about price or availability must be checked against the selected lot and current supply conditions.

This Iranian marble is often selected when a project needs more character than a uniform gray surface but less visual complexity than strongly brecciated or highly multicolored stones. The gray field connects easily with wood, bronze-toned metal, black fixtures, glass and warm lighting. For procurement, the most useful advantage is not uniformity, but the ability to select and organize the natural variation into a planned composition.

• • Classic medium-gray to dark-gray design direction with white veining.
• • Suitable for coordinated slabs, floors, walls, stairs and fabricated interior components.
• • Polished and honed finishes support distinct design moods.
• • Current slab review and digital vein planning can improve alignment between approved intent and fabrication.
• • Often considered cost-effective for a recognized imported gray marble, subject to actual grade, yield, processing and logistics.

Compare gray stones by material category and project behavior, not color alone. Pietra Grey is natural marble: it offers authentic variation and can etch under acid exposure. Alternative dark marbles may have stronger contrast, while engineered quartz can provide more pattern control but follows different fabrication, heat and manufacturer requirements.

The answers below address the decisions that most directly affect an international order: current slab approval, thickness tolerance, surface inspection, fabrication coordination, vein layout, transport protection, maintenance and quotation scope. All supply details remain subject to the selected material, approved documents and contract terms.

Landiview Stone supports two purchasing models: slabs for importers, distributors and fabricators, and project-specific cut-to-size or finished stone for contractors, developers, designers and builders. The practical distinction is important because slab trading prioritizes selection and packing, while project fabrication requires drawing, layout, inspection and installation coordination.

▌ Support for Slab Buyers

Support can include current slab selection, slab-image review, color and vein-range confirmation, surface inspection, slab identification and export packing. Availability, reservation terms and required inspection records should be confirmed for the current lot.

▌ Workflow for Cut-to-Size and Custom Products

1. 1. Review architectural drawings and identify the stone scope.
2. 2. Prepare stone shop drawings for client and design-team approval.
3. 3. Submit current slabs; if unsuitable, study block selection and special slab cutting where appropriate.
4. 4. Use approved slab scans in AutoCAD to simulate cutting and vein layout before production.
5. 5. Fabricate to approved documents, then dry lay, inspect and number finished pieces.
6. 6. Replace nonconforming pieces when required while considering adjacent color and veining.
7. 7. Apply project-specific protection, including temporary reinforcement for vulnerable geometry, before export packing.

▌ Complex Assembly Review

For complex fabricated products, the project team may use three-dimensional component modeling and virtual assembly review to examine component relationships, material thicknesses, surface treatments, concealed reinforcement, clearances and possible interference before fabrication details are finalized. This review supports coordination but does not replace project engineering, local code compliance or licensed professional approval.

▌ Relevant International Project Experience

• • Marble furniture, bathroom vanity tops and shower wall panels for the Grand Hyatt Singapore renovation project
• • Stone supply for stations on Singapore's Thomson-East Coast Line
• • Interior stone products for the Wynn project in the United Arab Emirates
• • Marble products for public areas of the 255 East 77th Street luxury residential project in New York
• • Interior and exterior marble and granite products for three high-end custom homes on Tuckahoe, a private resort island in Massachusetts, USA

The sources below support only the statements for which they are cited. Product-specific appearance, standard thickness, tolerance, services and project experience are based on Landiview Stone's supplied product and internal records; current orders still require material and contract confirmation.

1. [1] Natural Stone Institute. "Learn About Cleaning Products for Natural Stone." No publication date shown on the accessed page. Natural Stone Institute care guidance. Accessed September 22, 2026. Supports pH-neutral cleaning, prompt spill response and avoiding unsuitable acidic or abrasive cleaners.
2. [2] ASTM International. "ASTM C503/C503M-15: Standard Specification for Marble Dimension Stone." Last updated September 9, 2022; listed by ASTM as historical. ASTM C503/C503M public abstract. Accessed September 22, 2026. Used only for the public scope of dimension marble and property categories; no paid text or lot-specific value is claimed.
3. [3] International Plant Protection Convention. "Regulation of Wood Packaging Material in International Trade (ISPM 15)." IPPC ISPM 15. Accessed September 22, 2026. Supports treatment and marking requirements for regulated wood packaging in international trade.
4. [4] U.S. Occupational Safety and Health Administration. "Hazards of Transporting, Unloading, Storing and Handling Granite, Marble and Stone Slabs." SHIB 08-12-2008, August 12, 2008. OSHA advisory bulletin. Accessed September 22, 2026. Supports the broad principle that slab handling and storage require trained procedures and hazard controls.

▌ Further Reading from Landiview Stone

• • How to order cut-to-size stone from China
• • What is cut-to-size stone?
• • Natural stone slab layout in AutoCAD
• • How to protect natural stone during shipping

For a workable Pietra Grey quotation, send the scope that controls material yield and fabrication: dimensions, thickness, quantity, finish, application, visual expectations and destination. Drawings and cutout details allow the technical team to identify coordination points before pricing.

Request current Pietra Grey marble slab availability or a quotation for custom cut-to-size stone. Include slab or finished-piece dimensions, nominal thickness, quantity, finish, intended application and delivery destination. If architectural drawings, stone schedules, templates or edge details are available, attach them to the inquiry.

Subject to current availability, Landiview Stone can provide slab photos or videos, slab identification and quotations for fabrication. Project-order support can also cover stone shop drawings, scanned-slab AutoCAD vein layout, dry-layout inspection, piece numbering, temporary reinforcement for vulnerable parts and export packing.

Request A Project Quote Or Slab Availability