Polished Revolution Quartzite slab with burgundy tones, dark flowing bands and fine white veins
Revolution Quartzite kitchen countertops and waterfall island with mitered edges in a luxury modern kitchen
Revolution Quartzite bathroom vanity top with a panel-fabricated integrated sink and mitered edges
Luxury interior staircase with Revolution Quartzite treads an drisers, walnut side panels and glass railings
Revolution Quartzite bath tub deck with mitered apron and side panels in a luxury bathroom
Revolution Quartzite fireplace surround and projecting hearth with mitered edges in a luxury living room
Brazilian Revolution Quartzite Slab
- Fast Delievery
- Quality Assurance
- 24/7 Customer Service
Executive Summary
Revolution Quartzite is a Brazilian natural quartzite selected for projects that need a burgundy stone with dark flowing bands and fine white veins. It is available as slabs or as coordinated custom-fabricated products, with actual slab approval recommended before purchase.
Also traded as Red Fusion quartzite, this material is relevant to slab importers, distributors, fabricators, stone contractors, interior designers, developers and builders. Recommended uses include kitchen islands and countertops, bathroom vanity tops, interior staircases, bathtub decks and fireplaces. Standard slab thickness is 18 mm. For projects requiring 20 mm or 30 mm, Landiview Stone can investigate block selection and special slab cutting according to project needs and block availability. Buyers should submit dimensions, finish, quantity, application, drawings and destination for a project-specific review.
Key Facts
The confirmed commercial facts are the stone name, alternative name, natural-quartzite category, Brazilian origin, visual direction, standard 18 mm slab thickness, project-dependent 20 mm or 30 mm block cutting, polished or honed finishes, and the listed interior applications.
| Product Attribute | Buyer Information |
| Product name | Revolution Quartzite slab |
| Alternative trade name | Red Fusion quartzite |
| Material | Natural quartzite |
| Origin | Brazil |
| Color and visual character | Burgundy tones, dark flowing bands and fine white veins |
| Standard slab thickness | 18 mm |
| Optional thickness | 20 mm and 30 mm may be specially cut from selected blocks, depending on project requirements and block availability. |
| Thickness tolerance | Stated standard: ±1 mm. Confirm the measurement method and project acceptance criteria in the contract, drawings or inspection standard before ordering. |
| Recommended finishes | Polished and honed |
| Recommended applications | Kitchen islands and countertops, bathroom vanity tops, interior staircases, bathtub decks and fireplaces. |
| Supply forms | Slabs; project-specific cut-to-size or finished stone products. |
| Lot-specific information | Slab sizes, stock, resin or mesh treatment, tests, lead time, MOQ and price are subject to confirmation. |
Available Finishes and Processing Options
Polished and honed are the recommended finishes. The decision should be made against an approved current slab or representative finish sample, because finish changes color depth, reflection and the visibility of the stone's layered movement.
▌ Polished Finish
A polished surface intensifies the burgundy field and creates stronger contrast between dark bands and fine white veins. It suits statement islands, vanity tops, bathtub surrounds and fireplace features where visual depth is important. Buyers should review glare, lighting and maintenance expectations and should approve the actual finish quality for the selected lot.
▌ Honed Finish
A honed surface provides lower reflection and a softer reading of the pattern. It can support quieter interiors and stair components where strong gloss is not desired. Honing can alter apparent color and may make handling marks or residues more visible, so a representative sample and a defined cleaning procedure are advisable.
▌ Thickness and Fabrication Planning
The standard slab thickness is 18 mm. If 20 mm or 30 mm is required, block selection and dedicated slab cutting can be studied, subject to availability. Edge build-ups, mitered returns, joints, cutouts, concealed support and substrate conditions should be coordinated in approved shop drawings. Structural support and installation details must follow project specifications and qualified local professional guidance.
Recommended Applications
Revolution Quartzite is recommended for visually prominent interior surfaces where slab selection and vein planning can contribute to the finished composition. Suitability must still be assessed against the selected slabs, geometry, support, exposure, fabrication details and local installation requirements.
▌ Kitchen Island and Kitchen Countertop
The layered burgundy movement can turn a central island into the visual anchor of a kitchen. Buyers should prioritize usable slab yield, seam positions, edge direction, overhang support and the relationship between the island, perimeter tops and waterfall panels. Large sink or cooktop cutouts create vulnerable sections. Where conditions permit, a documented semi-cutout may retain selected connections for transport, with final cutting completed on site by the installation team. Templates, appliance data and approved drawings remain essential.
▌ Bathroom Vanity Top
Fine white veins and dark bands can give a vanity top a strong furniture-like character, particularly with a fabricated integrated sink or mitered fascia. Review basin geometry, faucet clearance, backsplash, cabinet space, drainage and access before approval. Large openings, narrow rails and mitered components require handling protection. Sealant, adhesives, waterproofing and support must be selected by the responsible project professionals for the actual assembly and wet-area conditions.
▌ Interior Staircases
Revolution Quartzite can be used for treads and risers to create a sequenced flow of burgundy bands through the stair. The layout should address vein direction, piece order, nosing or edge build-up, joint alignment, slip considerations and substrate tolerances. Finish and stair geometry must comply with project requirements and local rules. Piece numbering linked to installation drawings helps the site team preserve the approved sequence.
▌ Bathtub Deck
A bathtub deck can use coordinated top, apron and side panels to present the stone as a continuous composition. Confirm the tub template, service access, panel joints, edge returns, substrate, waterproofing and movement accommodation before fabrication. Mitered panels require accurate shop drawings and dry-layout review. Cleaning products, sealers and installation materials should be compatible with natural stone and the wet environment.
▌ Fireplace
The burgundy field can distinguish a fireplace surround, hearth or projecting mantel in a living space. The fireplace manufacturer, designer and qualified installer must define clearances, temperature exposure, substrate, joints, attachment and applicable code requirements. The stone layout should account for openings and mitered corners, while narrow or projecting components may need temporary transport reinforcement. Natural stone should not be treated as a substitute for required noncombustible assemblies or engineering.
Why Choose This Stone
Choose Revolution Quartzite when the design calls for a natural burgundy surface with broad directional movement rather than a uniform red field. Its strongest value comes from selecting the right slabs and deliberately assigning each cut to the finished composition.
- • A distinctive combination of burgundy tones, dark flowing bands and fine white veins.
- • Natural variation that can support one-of-a-kind islands, feature stairs and coordinated panel assemblies.
- • Polished and honed options for different levels of reflection and visual depth.
- • Supply flexibility from slabs to project-specific fabricated products.
- • A design that benefits from digital vein-layout planning, client approval and factory dry layout.
Quartzite is generally valued as a hard, quartz-rich dimension stone, but hardness does not mean immunity from edge chipping, fissures, breakage, staining or transport damage. Material classification, finish, fabrication details and application suitability should be confirmed for the selected lot, and any required testing should be specified by the buyer or project team [1].
Comparison with Similar Stones
Revolution Quartzite should be compared by actual slab appearance, verified material category, finish, usable yield and application requirements, not by trade name alone. Stones with similar red or multicolor impact can differ substantially in mineral composition and care expectations.
| Stone | Typical Visual Direction | Material Category | Typical Uses | Buyer Considerations |
| Revolution Quartzite / Red Fusion | Burgundy tones, dark flowing bands and fine white veins | Natural quartzite | Islands, countertops, vanity tops, stairs, bathtub decks and fireplaces | Approve actual slabs, thickness, usable yield, natural features, treatment and vein plan. |
| Red granite varieties | Red to burgundy fields, often granular or crystalline rather than strongly layered | Granite or commercially grouped granitic stone; verify the selected material | Countertops, floors, stairs and architectural work | Pattern scale and mineral structure differ; compare current slabs, finish and technical data. |
| Rosso Levanto and other red marbles | Deep red field with contrasting white veining | Calcareous marble | Vanities, walls, fireplaces and decorative interiors | Acid sensitivity and etching expectations differ from siliceous quartzite; application and care require separate review [2]. |
| Red engineered quartz or porcelain | More repeatable factory-designed color or printed pattern | Manufactured surfacing product | Countertops, walls and furniture surfaces, depending on manufacturer approval | May offer greater visual consistency, but pattern depth, edge fabrication, heat limits and installation rules are manufacturer-specific. |
Frequently Asked Questions
Most purchase risk can be reduced by defining the exact slab lot, acceptance range, thickness, finish, drawings, layout, inspection method, packing and destination requirements before production. The answers below identify what can be coordinated and what remains project-specific.
Q: Is Revolution Quartzite the same as Red Fusion quartzite?
A: Red Fusion quartzite is another trade name used for Revolution Quartzite. Because commercial stone names can vary by market, buyers should match the name to current slab photos, slab numbers, origin information and the agreed appearance rather than rely on the trade name alone.
Q: Can you provide Revolution Quartzite samples?
A: Yes. Normally one or two samples can be provided without a sample charge, while the customer pays courier cost. Typical sample sizes range from 100 × 100 mm to 200 × 200 mm, subject to current material availability. A small sample is useful for reviewing finish and basic color character, but it cannot represent the full movement of a large slab. Current slab images or videos should therefore be approved for purchasing decisions.
Q: What is your slab thickness tolerance?
A: The stated standard thickness tolerance is ±1 mm. Before ordering, the buyer should confirm the nominal thickness, measurement points, measuring method and acceptance criteria in the contract, drawings or agreed inspection standard. Project requirements for joints, edge build-ups, substrates and adjoining materials may be more important than a headline tolerance alone.
Q: How do you inspect Revolution Quartzite slab surface quality?
A: The review focuses on cracks that may affect handling or fabrication, overall visual coordination, unusually large discordant black areas, and color or vein variation against the buyer-approved range. Natural veins, mineral changes and healed or open fissures must be distinguished carefully from structural cracks and fabrication defects. The acceptance method should be agreed for the selected lot because natural features can differ from slab to slab.
Q: Can I see current slab photos and videos before ordering?
A: Yes, subject to actual stock. Landiview Stone can provide current-lot slab images or video, slab identification numbers, surface observations and a review of the available color and vein range. Buyers should identify the approved slabs and record any agreed exclusions or matching requirements before the order is finalized.
Q: What slab thicknesses are available?
A: The standard slab thickness is 18 mm. For a project that requires 20 mm or 30 mm, Landiview Stone can investigate selecting suitable blocks and cutting slabs to the required thickness. This option depends on block availability, required dimensions, yield, finish and commercial feasibility, so it should be reviewed before specifications are finalized.
Q: Can you supply cut-to-size and finished products, not only slabs?
A: Yes. The buyer submits architectural drawings, and the technical team develops stone shop drawings for review. Current slabs are submitted, or block selection and special cutting may be investigated if available slabs are unsuitable. After drawings and slabs are approved, slab scans can be used for AutoCAD cutting and vein-layout simulation. Following approval, the factory fabricates, dry lays, inspects, replaces nonconforming pieces when required, numbers pieces and applies project-specific protection, temporary reinforcement and export packing. See how to order cut-to-size stone from China.
Q: Can Landiview Stone prepare stone shop drawings from architectural drawings?
A: Yes. The technical team can identify the stone scope and develop stone-specific drawings covering dimensions, thicknesses, cutouts, visible surfaces, finishes, joints, edges and relevant fabrication details for client and design-team approval. Shop drawings coordinate fabrication but do not replace the structural, code, waterproofing or installation responsibilities of appropriately licensed local professionals. Read what cut-to-size stone means for project procurement.
Q: How do you help control the final vein layout and installed appearance?
A: Approved slab scans can be placed in AutoCAD to simulate cutting locations, vein direction and relationships between adjoining pieces before cutting. The client reviews the proposed layout, and finished pieces are subsequently dry laid for inspection and numbering. This process reduces information gaps between design, production and installation, but natural variation, image calibration, fabrication tolerances and site installation can still affect the final appearance. See natural stone slab layout in AutoCAD.
Q: How do you protect slabs and finished stone during shipping?
A: Slabs use robust export packing such as a wooden frame or crate, or an A-frame and support arrangement designed for the actual container plan. Finished products may receive linings, shock reduction, custom foam, plywood separators and edge protection. Sink or cooktop cutouts, narrow backsplashes, strips, vanity tops, fireplace parts, narrow wall panels and vulnerable corners may receive removable support strips over protective film. Temporary reinforcement is removed before installation according to instructions. Regulated raw-wood packaging should meet destination requirements, including ISPM 15 where applicable [3]. See how to protect natural stone during shipping.
Q: How should installed Revolution Quartzite be maintained?
A: Use a pH-neutral cleaner intended for natural stone, address spills promptly, rinse as needed and avoid unidentified acidic or alkaline products and abrasive tools. Even siliceous stones can contain acid-sensitive trace minerals, so acidic cleaners are not recommended [2]. Sealer selection and reapplication interval depend on the selected slab, finish, exposure, use and sealer manufacturer's instructions. Follow project specifications and the advice of the fabricator, installer and maintenance-product manufacturer.
Q: What affects the price of Revolution Quartzite?
A: Pricing is project-specific. It can be affected by current slab or block availability, slab dimensions and usable yield, selection range, thickness, finish, treatment, cutting complexity, mitered work, cutouts, dry layout, replacement allowance, packing and delivery destination. For a meaningful quotation comparison, buyers should submit the same approved scope, drawings and quality criteria to each supplier rather than compare only a square-metre rate.
Q: Is Revolution Quartzite suitable for exterior use?
A: This page recommends Revolution Quartzite for the listed interior applications and does not make a general exterior-suitability claim. Exterior use requires project-specific evaluation of test data, climate, freeze-thaw exposure, finish, anchorage or support, joints, drainage, thickness and local code requirements. Request appropriate current-lot documentation and professional design review before specifying the stone outdoors.
Why Landiview Stone
Landiview Stone supports both slab procurement and project-specific finished stone. Its practical value lies in connecting material approval with drawings, digital layout, fabrication checks, identification and export protection rather than treating fabrication and logistics as separate decisions.
▌ Supply and Technical Workflow
Landiview Stone supplies slabs for importers, distributors and fabricators, and project-specific cut-to-size or finished products for contractors, developers, designers, builders and other project buyers. Slab services can include current-slab selection, image review, color and vein-range confirmation, surface inspection, slab identification and export packing.
For custom fabrication, the team can coordinate architectural-drawing review, stone shop drawings, slab scanning, AutoCAD cutting and vein-layout simulation, fabrication, dry-layout inspection, piece numbering, finished-product inspection, temporary reinforcement for vulnerable components and project-specific export protection. Complex assembled products may also be modeled and virtually reviewed in three dimensions to examine component relationships, thicknesses, surface treatments, concealed reinforcement, clearances and potential interference before fabrication details are finalized.
- 1. Review architectural drawings and identify the stone scope.
- 2. Prepare stone shop drawings for client and design-team approval.
- 3. Submit current slabs; if unsuitable, investigate block selection and special slab cutting when appropriate.
- 4. Use approved slab scans in AutoCAD to simulate cutting and vein layout before production.
- 5. Fabricate to approved documents, then dry lay, inspect and number finished pieces.
- 6. Replace nonconforming pieces when required while considering adjacent color and veining.
- 7. Apply project-specific protection, including temporary reinforcement for vulnerable geometry, before export packing.
▌ Selected International Project Experience
- • Marble furniture, bathroom vanity tops and shower wall panels for the Grand Hyatt Singapore renovation project
- • Stone supply for stations on Singapore's Thomson-East Coast Line
- • Interior stone products for the Wynn project in the United Arab Emirates
- • Marble products for public areas of the 255 East 77th Street luxury residential project in New York
- • Interior and exterior marble and granite products for three high-end custom homes on Tuckahoe, a private resort island in Massachusetts, USA
Request A Quote
For current Revolution Quartzite slab availability or a custom-fabrication quotation, send the required dimensions, thickness, quantity, finish, application and delivery destination. Include architectural drawings, templates or schedules when available.
Landiview Stone can respond with available slab information, current slab photographs or video and a quotation based on the submitted scope. For project orders, the technical team can also coordinate stone shop drawings, scanned-slab vein layout, dry-lay inspection, piece identification and export packing according to the product geometry and shipping plan. Availability, lead time and commercial terms are confirmed for each inquiry.
Hot Tags: Revolution Quartzite, Red Fusion quartzite, Brazilian quartzite supplier, burgundy quartzite, Landiview Stone
Previous
No InformationNext
Xango QuartziteYou Might Also Like
Send Inquiry